Rotary Engine : Main Parts & Working | Wankel Engine

The rotary engine is alternative of the reciprocating engine. It is developed by Wankel in the year 1957. In the rotary type of engine, the pressure force generated by the combustion of fuel is exerted on a rotor. So the rotor revolves and converts the chemical energy of fuel into mechanical energy. This engine is compact and it has the high power-weight ratio, so this is widely used in submarines and helicopters.

Main parts of Wankel rotary engine:

In Wankel rotary engine, some parts work together and achieve the goal of convert the energy. These parts are

Wankel Engine

In a rotary engine, a triangular shaped rotor is used. It has three convex faces. Each faces acting like a piston. The rotor works as the prime mover in the rotary engine. The force generated by the combustion of fuel is directly exerted on the rotor, so it rotates eccentrically. The rotor has an internal timing gear on one side, which mash with the fix timing gear, situated on the side housing to maintain correct relationship between the rotor and the eccentric shaft.

The rotor spin in the oval-shaped chamber known as housing. The function of housing is the same as the function of the cylinder in the reciprocating engine. The housing contains an inlet and outlet port, spark plug, water jacket etc. The main housing is closed by use of side housing. Side housing contains a fix timing gear which meshes with the internal timing gear and maintains correct relationship between the rotor and the eccentric shaft. It is usually made by aluminum-silicon alloy.
Eccentric shaft:
Eccentric shaft, which is also known as the output shaft is used to convert the eccentric motion of rotor into concentric motion and carry it out from the engine.
Apex seal
All sides of the triangular rotor work as the piston. So it is necessary to seal this entire chamber with one another. To fulfill this function, apex seal is used to each corner of the rotor. It is a gas-tight sealing between the rotor and housing. It is usually made by cast iron and sometimes by high carbon steel.

Working of Wankel rotary engine:

The energy converting process in a Wankel rotary engine is divided into four processes. These are intake, compression, power, and exhaust. All processes are going on at the same time around each rotor while the engine is running. The engine has three-lobed. The rotor is driven eccentrically in the casing in such a way that there are three separate volumes trapped between the rotor and the casing. These three volumes perform induction, compassion, combustion and exhaust processes in sequences.

Intake process:
Intake is mean to intake of air-fuel mixture into the engine. When the lobe A moves, the space between lobe A and C expands. This cause air-fuel mixture enters into the engine through the inlet port to fill the space. When the lobe C passes the intake port, the space between A and C sealed off.

Rotary Engine

Compression process:
When the rotor revolves, the space between lobe A and B greatly reduced. So the mixture between lobe A and B compress.

Combustion process:
When the mixture between A and B compressed completely, a spark generates at the spark plug which ignites the mixture. It burns and forces the rotor to turn. It is also known as power generating process.

Exhaust process:
When the lobe B passes the exhaust port the burn-mixture exhausts.

These strokes of intake, compression, combustion, and exhaust follow continuously in each rotor chamber. This occurs as long as the engine is running.

Today we have discussed the Rotary Engine: Main Parts & Working. If you have any query, ask by commenting.

Rotary Engine : Main Parts & Working | Wankel Engine Rotary Engine : Main Parts & Working | Wankel Engine Reviewed by Admin on August 05, 2018 Rating: 5

No comments:

Powered by Blogger.